Socket Mobile IC-4088A ‘Resetting the transceiver, ATS Automatic Transponder System

9 OTHER FUNCTIONS

■ATS (Automatic Transponder System)

This allows the user to confirm whether or not a call has reached the receiving party even if the operator is temporarily away from the transceiver. No “Ring” tone is emitted with this function.

➥ While pushing [PTT], push [MODE] to turn the function ON and OFF.

•“ ” appears on the display.

• The transceiver starts to send a	[PTT]
searching signal every 60 sec.
- When the transceiver receives
an answer back signal, “ ”
stays on the display until the	[MODE]
next search transmit.

- If no reply is received, “ ” blinks until the next search transmit.

NOTE: Above setting is for the calling station only. A called party

automatically sends an answer back signal without any preset-

tings. All IC-4088A’s operating on the same operating channel

will answer back to the call in the surroundings communications area.

‘Resetting the transceiver

Initialize the operating conditions before using the transceiver for the first time, or if the function display shows erroneous information.

➥While pushing [Z] and [MODE], push [PWR] for 1 sec. to initial- ize the transceiver.

CAUTION: Resetting the trans-

ceiver returns all settings to their defaults.

[PWR]

[MODE]

[Z]

20