How Do I Connect the Scanner to the Phone? Note: Nokia 3660 screens are shown. Your device screens may vary slightly.
1. Turn on the Cordless Hand Scanner. Press the small power button for
five seconds, until you see the LED turn blue. The LED should blink
blue once every second to show that the Bluetooth radio is on but not
connected. If the LED begins blinking red, the battery needs to be
recharged.
WARNING: Do not use the CHS when it is being
charged, or the battery may have problems achieving a
full charge in the future.
2. Prepare your phone for a Bluetooth connection. Make sure the
Bluetooth radio is turned on. If needed, make sure a COM port is
enabled for outbound Bluetooth Serial communications, and note
the COM port number. Refer to the documentation for your
Smartphone for instructions.
3. Start SocketScan. In the Main Menu, select Socket and press the
joystick/cursor.
CHAPTER 3: SOCKETSCAN FOR SYMBIAN S60 17