4. The main screen of SocketScan will appear. Press Connect to search
through all Bluetooth devices in range, or press Connect to Previous to
connect to the CHS you previously connected to.
After you connect to the CHS, the Smartphone will save
information about the CHS for future connections.
5. Your phone will begin searching for Bluetooth enabled devices in range.
After your phone detects the Socket CHS, press Stop. Select Socket
CHS.
The Cordless Hand Scanner will appear as Socket CHS [xxxxxx], where
the characters in brackets are the last 6 characters of the scanner’s
Bluetooth MAC address. If multiple Cordless Hand Scanners were
detected, identify yours by checking the MAC address printed on a label
in the battery compartment.
6. Your device will automatically connect to the CHS. If a passkey is
requested, enter 1234. To indicate the connection, the CHS will beep
once.
CHAPTER 4: SOCKETSCAN FOR SYMBIAN S80 29