English
3.2 Totalising and batching
Totalising means that the individual pieces are weighed one after the other. The weight is added in the total memory and the scale is clipped off after each weighing operation.
Batching means that the weighed pieces remain on the scale.
The weight is added in the total memory and the scale is zeroed without being clipped off.
A change in measuring point during batching is not possible.
The choice between totalising and batching is defined in Setting mode.
This selection applies to all connected weighing platforms.
As an example, we will only describe the totalising function here.
Total memory with several connected scales
A central total memory is managed for all connected scales.
Total memory capacity: The total memory holds a maximum of 999 entries.
The total memory must then be cleared.
3.2.1 Function keys
The F1 to F6 function keys help you control the functions.
They are programmed in 3 levels. Switch between the levels by pressing the function change key (F>).
1st level: totalising functions
Sum
Cancel
Manual
Plus
2nd level: taring functions
Tare
fix
Add Tare
Zw
Tare
Multi Tare
3rd level: setting functions
Gross
X 10
Unit
Program
Setting
mode
18
