3. FAULTS – CAUSES AND REMEDIES
DISPLAY | CAUSES | REMEDY |
|
|
|
| The scale is not reset to »0.0 kg« when | Unload the scale and restart the |
| switched on. | display unit. If the error remains, |
|
| please contact your service partner. |
|
|
|
| Underload: only dashes appear at the bottom | Switch the display off and on again, |
| of the display field. | or pull out the mains plug. If the error |
|
| occurs again, please contact your |
|
| service partner. |
|
|
|
| Overload: only dashes appear at the top of | Unload the scale, or switch them off |
| the display field. Maximum weighing range is | and on again. Check the maximum |
| exceeded. | weighing range. |
|
|
|
| The weighing value does not stabilise. | Check the surface under the scale, |
|
| and check that the weighing platform |
|
| is level. If the error persists after |
|
| readjustment, please contact your |
|
| service partner. |
|
|
|
| The weighing value does not stabilise. | Stand still or stabilise the weight on |
|
| the scale or restart the scale. |
|
|
|
| Height rod is not in reference position during | Fold up the height rod during power- |
| up. | |
|
|
|
| The rechargeable battery is empty. | Charge the battery. |
|
|
|
If the fault cannot be cleared, or other error messages appear, please contact your service partner.
19
