PREPARATION FOR USE
1.Remove the front panel by pressing the two small buttons on the bottom of each side.
2.Remove the Dust Frame
3.Remove the HEPA & Cold Catalyst Filter Holder
4.Remove the HEPA & Cold Catalyst Filter from the package.
5.Insert HEPA & Cold Catalyst Filter into the holder.
6.Place the HEPA & Cold Catalyst Filter Holder back into the unit.
7.Place the Dust Frame back into
the unit. | 3 | 4 & 5 |
|
|
8.Close the Front Panel
9.Remote - Remove the battery holder in the Remote Control
10.Place the battery inside the holder. Make sure to align the battery according to the image to the right.
1
2
5
