OPERATING INSTRUCTIONS
Using Fan Controls
1)Set the fan on a stable, level surface.
2)Turn the fan on by pressing the Power/Speed button located below the
3)Adjust the speed setting by pressing the Power/Speed. To adjust the speed setting using the remote, press the On/Speed button.
4)Pressing the Mode button on either the fan or the remote will choose the desired wind mode: Standard, Natural, Work/Sleep. In standard mode the fan operates at a steady speed. Natural mode simulates the wind by alternating the speed of the fan. In Work/Sleep mode the fan decreases speed in the middle of the oscillation pattern.
5)To oscillate the fan head, press the Swing button located on the fan or the remote.
6)This fan includes a 7.5 hour timer. To operate the timer, press the Timer button (located on the fan & remote) until the desired time is visible on the
7)To turn the fan off, press the Power/Speed button on the fan, or the Off button on the remote control.
Adjusting Height and Fan Head Tilt
•To adjust the height of the fan, turn the Adjustable Height Knob (L) counter- clockwise to loosen the stand. Adjust the fan to the desired height, then firmly tighten to secure into place.
•To adjust the tilt on the Fan Head, loosen the knob below the Motor Housing and tilt the fan forward/back by pulling or pushing the top of the Fan Grill. The fan will make a clicking noise while being adjusted. Once the Fan Head is set to the desired tilt, tighten the knob to secure into place.
7
