OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
1)When first operating the dehumidifier, run it in Continuous mode for 24 hours.
2)Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off.
3)Humidity Selection - Press the “+” or
4)Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High, Medium, and low. The fan speed can be visually distinguished by the fan speed indicators on the control panel.
5)Timer - To program the unit to automatically turn off, press the TIMER button when the unit is on. You can select either 2 or 4 hours with the Timer. Once the desired time (2 or 4 hours) is over, the unit will automatically shut down.
To program the unit to automatically turn on, connect the power cord without turning on the unit and press TIMER button to select either 2 or 4 hours. Once the desired time (2 or 4 hours) is over, the unit will automatically turn on.
6)Bucket Full - When the water bucket is full of water, the unit will automatically shut off , make a beeping noise, and the Bucket Full Indicator will light up. The dehumidifier will not function until the water bucket is emptied and placed back inside the unit. The bucket should be cleaned every few weeks to pre- vent the growth of mold, mildew and bacteria. Use a mild detergent to clean the bucket. Once clean, com- pletely dry the bucket and place it back inside the dehumidifier.
NOTE: Support bucket with both hands when emptying
NOTE: When the bucket is full or removed from the machine, the compressor will turn off, but the fan will continue to run for a few minutes. This is completely normal. The dehumidifier will not be removing moisture from the air at this time.
NOTE: When removing moisture from the air, the dehumidifier will exhaust warm air from the side exhaust vent.
7