Auto Mode
1)Install the exhaust hoses and window kit properly (see pages 7 & 8).
2)Plug the Power Cord into an electrical outlet.
3)Turn on the unit by pressing the POWER button on the control panel.
4)Press the MODE button until the “ 
” icon appears on the control panel display.
NOTE: During AUTO mode, the unit operates in Dehumidifier mode when the room temperature is between 68 °F to 80 °F. The unit will operate in Air Conditioner mode when the room temperature is above 80 °F. In Auto mode, the fan speed cannot be manually changed.
Sleep Mode (This mode can only be selected when using the Remote control )
1)To set Sleep mode, make sure the unit is in Air Conditioner mode.
2)Press the SLEEP Button on the remote control. The “ 
” icon appears on the control panel display.
3)When in SLEEP mode, the fan will run on low to keep fan noise at a minimum.
4)When in Air Conditioner mode, the temperature setting will gradually increase to 2°F above the original set temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature.
5)When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
Compressor Indicator |
| |
The “ | ” icon will light up on the control panel display when the compressor turns on. The “ | ” icon will |
turn off when the compressor shuts off. |
| |
12
