Fig. 4 | Fig.5 | Fig. 6 |
Moving the Dehumidifier
1.Drain the water.
2.Lift up the handle and tilt the unit back.
3.Move the unit by rolling on the back casters.
NOTE:
1.If the floor is made of a material that scratches easily, or if the floor is uneven, lift the unit off the floor and move it. Avoid rolling the unit if the floor has shag carpeting. This can damage the surface of the carpet.
2.Tilt it within range of 20 to 30 degrees. (If you tilt the unit too far, you may scratch the floor or water may leak.)
3.Be careful that the power supply cord does not get pinched under the unit.
Clearance
Maintain the minimum clearance around the dehumidifier when the unit is operating as shown in the figure at right.
10
