IMPORTANT SAFETY INSTRUCTIONS
READ THIS SECTION BEFORE ATTEMPTING TO OPERATE YOUR AIR CONDITIONER
The power supply cord contains a current device that senses damage to the power cord. Follow the instructions below to test your power cord.
1.Plug in your air conditioner
2.The power supply cord will have TWO buttons on the plug. Press the TEST button. You will notice a click as the RESET button pops out.
3.Press the RESET button. The button will click when the RESET button engages.
4.The power supply cord is now supplying electricity to the unit.
NOTE:
•Do not use this device to turn the unit on or off.
•Always make sure the RESET button is engaged for correction operation
•The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or it cannot be reset. A new one can be obtained from Soleus Air Powered by Gree.
•If the power supply cord is damaged, it CANNOT be repaired. It MUST be replaced with one obtained from Soleus Air Powered by Gree.
OPERATION OF CURRENT DEVICE
15
