INSTALLING THE PUMP HOSE
OPTION 3: USING THE INTERNAL VERTICAL PUMP - Only install when us- ing pump mode!
INSTALLING THE INTERNAL PUMP HOSE
Step 1: Remove the bucket from the dehumidifier (Fig. 8)
(FIG. 8)
Step 2: Remove the pump hose connector from the top of the bucket. It is located to the left of the bucket han- dle. (Fig. 9)
(FIG. 9)
Step 3: Thread the pump hose connector onto the drain nozzle that is visible after removing the bucket. (Fig. 10)
(FIG. 10)
10
INSTALLING THE PUMP HOSE
Step 4: Insert the pump hose onto the pump hose con- nector. Push the clamp towards the connector to se- cure the connection. (Fig. 11).
(FIG. 11)
Step 5: Remove the drain cover from the back of the bucket prior to seating the bucket in the unit. (Fig. 12) Place bucket in the dehumidifier for use (Fig.13)
(FIG. 12) | (FIG. 13) |
NOTE: When removing the drain hose, excess water may spill from the dehumidifier. Use a small pan or bowl to catch the water and prevent it from spilling onto the unit or the floor.
11
