Soleus Air SG-PAC-12E1HP manual Remote Control Operating Instructions, Sleep Button, X-Fanbutton

REMOTE CONTROL OPERATING INSTRUCTIONS

REMOTE CONTROL

SLEEP

SLEEP BUTTON

Press the SLEEP mode button to engage SLEEP mode.. This feature limits compressor usage and enhances energy savings by adjusting the set temperature while you are sleeping. Press the SLEEP button once more to disable Sleep Mode. Sleep Mode is not available in Auto or Fan Modes.

In Cooling or Dehumidifier (DRY) modes: When sleep mode is selected the set temperature will automatically increase 2°F after 1 hour. After 2 hours, the set tempera- ture will increase another 2°F for a total increase of 4°F.

In Heating mode (SG-PAC-12E1HP only): When sleep mode is selected the set temperature will automatically decrease 2°F after 1 hour. After 2 hours, the set tem- perature will decrease another 2°F for a total increase of 4°F.

X-FAN

X-FAN BUTTON

Press the X-FAN button to enable the X-Fan function. When enable, X-Fan will force the fan to remain on once the unit is powered down. The fan stays on to dry out any remaining moisture in the unit to help minimize mold or bacteria growth. X-Fan cannot be set under Auto, Fan, or Heat (SG-PAC-12E1HP only) modes.

LOCK LOCK FUNCTION

•Press “+” and “-” buttons together at the same time to lock the remote keyboard. Do this again to unlock.

LIGHT

LIGHT BUTTON

Press the LIGHT button to turn the on the display Light. A small Light bulb icon will light up on the remote con- trol display.

AUTO AUTO MODE

•Press the MODE button to select Auto Mode. Once Auto Mode is selected the unit will automatically choose the operating mode based on the current room temperature. The temperature will not be displayed on the LED in this mode.

TEMP
MEASURE	CHANGE BETWEEN F° and C°

•When the unit is off, press the MODE and “-” button to change between F° and C°.

12