Soleus Air SG-TTW-14HC Air Conditioner Featurescontinued, Guide for operation- General operation

Air Conditioner Features(continued)

Guide for operation- General operation

1.After powered on, press ON/OFF button, the unit will start to run.(Note: When it is powered off, the guide louver of main unit will close automatically.)

2. Press MODE button, select desired running mode, or press COOL or HEAT mode to enter into the corresponding operation directly.

3.Pressing + or - button, to set the desired temperature. (It is unnecessary to set the temp. at AUTO mode.)

4.Pressing FAN button, set fan speed, can select AUTO, FAN 1, FAN 2, FAN 3 or FAN 4.

5.Pressing SWING button, to select the swing.

Guide for operation- Optional operation

1.Press SLEEP button, to set sleep.

2.Press TIMER button, can set the scheduled timer on or timer off.

Introduction for special function

★About AUTO RUN

When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room temp. automatically to select the suitable running method and to make ambient comfortable.

★About LOCK

Under switch-on or switch-off state, you may hold "+" and "-" key simultaneously to lock and unlock the keypad. When locked, the display will show the LOCK icon, in which case the lock icon will flash three times upon operation of any key. After the keypad is unlocked, the

lock icon on the display will be hidden. After being energized, the default is unlock.

★About switch between Fahrenheit and Centigrade

Under switch-off state, you may hold "-" and "MODE" keys simultaneously to switch between

℃and℉.

Changing batteries and notices

1.Slightly to press the place to take out the back cover of wireless remote control.(As shown in figure)

2.Take out the old batteries. (As show in figure)

3. Insert two new AAA1.5V dry batteries, and pay attention to the polarity. (As show in figure)

4. Attach the back cover of wireless remote control. (As show in figure)

★ NOTE:

● When changing the batteries, do not use the old or different batteries, otherwise, it can cause the malfunction of the wireless remote control.

● If the wireless remote control will not be used for a long time, please take them out, and don't let the leakage liquid damage the wireless remote control.

● The operation should be in its receiving range.

● It should be placed at where is 1m away from the TV set or stereo sound sets.

● If the wireless remote control can not operate normally, please take them out,

after 30s later and reinsert, if they cannot normally run, please change them.

9