USING YOUR AIR CONDITIONER (Cont.)

•Freezing Conditions: This is a cooling only air conditioner. It is not designed for freezing outdoor conditions. It must not be used in freezing outdoor conditions.

•Remote Control: To ensure proper operation when using the remote control, aim the remote directly at the signal receiver on the air condi- tioner.

•The remote control has a signal range up to 20 feet.

•Make sure nothing is blocking the remote con- trol signal from being received by the air con- ditioner.

•Make sure the batteries are installed correctly and still have power.

•Cooling Mode: Use the COOL mode at Low, Me- dium, High, or Auto Fan speed when cooling is needed. Use the temperature ▲/▼ buttons to set the desired temperature between 64°F and 86°F.

•Once the temperature is set, the compressor will cycle on and off to keep the room temperature at the set temperature level. The lower the set thermostat temperature, the cooler the room will become. The higher the set thermostat temperature, the warmer the room will become.

•For Normal Cooling - Set the Mode to Cool and the Fan to High or Med with the termperature set in the middle.

•For Maximum Cooling - Set the Mode to Cool and the Fan to High with a lower set temperature.

•For Quieter & Nighttime Cooling - Set the Mode to Cool and the Fan to Low with the temperature set in the middle.

NOTE: If the air conditioner is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it may take approximately 3 minutes for the compressor to start and cooling to begin.

•Energy Saver Mode - Controls the Fan

•Fan Only Mode: Use Fan Only mode at Low, Med, or High fan speed to provide air circulation and filtering without cooling. Since fan only setting do not provide cooling, a Set temperature cannot be entered. The room temperature will appear in the display.

NOTE: Auto Fan Speed cannot be used in Fan Only mode.

•Loss of Power Protection: If power to the air conditioner is lost or interrupted, the air condi- tioner will automatically re-start in the setting last used prior to power loss. If the Timer was set to automatically turn the air conditioner off or on, it will resume countdown at the amount time left prior to power loss. You may need to set a new time if desired.

•Air Direction: Use the lever on the front air vents to adjust the direction of the airflow. You can di- rect the airflow left, right, up or down. The lever is located on the right side of the air vent.

On - The fan will cycle on and off with the compressor. This results in winder variations of room temperature and humidity. Normally used with the room is unoccupied. NOTE: The fan my continue to run for a short time after the compressor cycles off.

Off - The fan runs all the time in fan or cooling mode.

10

Page 10 Page 12
Page 11
Image 11
Soleus Air SG-WAC-06SE, SG-WAC-06ESE, SG-WAC-08ESE manual Using Your AIR Conditioner
Page 10 Page 12

SG-WAC-06SE, SG-WAC-08ESE, SG-WAC-06ESE specifications

Soleus Air has established itself as a prominent name in the air conditioning industry, consistently delivering effective solutions for both residential and commercial applications. Among their offerings, the SG-WAC-08ESE, SG-WAC-06ESE, and SG-WAC-06SE window air conditioners are notable for their impressive features, innovative technologies, and energy-efficient designs.

The Soleus Air SG-WAC-08ESE is designed for rooms up to 350 square feet, making it suitable for bedrooms, living rooms, and small offices. It boasts a cooling capacity of 8,000 BTUs, ensuring rapid temperature reductions even in hot summer months. One of its key features is the Energy Saver mode, which efficiently utilizes power by allowing the unit to automatically turn off once the desired temperature is achieved. This functionality not only saves on energy costs but also extends the lifespan of the unit.

Similarly, the SG-WAC-06ESE and SG-WAC-06SE models are aimed at slightly smaller spaces, covering areas of up to 250 square feet. With cooling capacities of 6,000 BTUs, these units are ideal for bedrooms or small living areas. The SG-WAC-06ESE includes an environmentally-friendly R-410A refrigerant, which contributes to lower greenhouse gas emissions. Additionally, both models feature a dehumidification function, effectively reducing humidity levels in the room and improving indoor air quality.

All three units are equipped with multiple cooling and fan speeds, allowing users to customize their comfort level according to specific needs. The straightforward digital controls, combined with a remote control feature, enhance user convenience by enabling adjustments from across the room. The washable and reusable air filter promotes cleaner air circulation and can be easily maintained.

In terms of installation, the Soleus Air models come with comprehensive instructions and all necessary hardware, simplifying the setup process for users. The sleek and modern design ensures that the units blend seamlessly with a variety of interior decors.

Overall, the Soleus Air SG-WAC-08ESE, SG-WAC-06ESE, and SG-WAC-06SE window air conditioners exemplify quality, efficiency, and user-friendly features, making them excellent choices for cooling spaces effectively and sustainably. With an emphasis on energy savings and ease of use, these models stand out in a competitive market, providing reliable climate control for a comfortable indoor environment.
Top Page Image Contents