Solid State Logic 82S6PC1010C manual System Components, C100 Console

Section 4 System Components

Section 4 – System Components

This sec tion gives an overview of the main un its in t he system. See A ppendix A for specifications and Appendices B and C for connector details and pinouts.

C100 Console

Each console control surface will consist of one Centre Section and can be specified to have from 8 to 96 channel faders in groups of 8. (Note: a group of 8 faders and controls and its frame is termed a bay). See page 10 for frame sizes.

Each console channel-bay consists of four sections: Faders, Channel Control, Master Channel and the meters. It is only necessary to have one Master Channel tile fitted t o the c onsole frame as this c an be used to access all channels, although for convenience and additio nal flexibility additional Channel Mas ters may be fitte d to any bay.

Only the faders are removable individually, all other panels (termed tiles) are 8 channels wide.

Note that the number of physical faders fitted does not limit the number of processing channels available; this is determined by the amount of DSP resource fitted to the processor.

The Centre Section may optionally be specified with a 6 or 8-channel LCD phase-scope and has additional space for mechanical meters. Alternatively, a range of custom meter configurations is possible; these should be detailed at the time of order.

The console frame may be specified to have 19” wide sections for script space (known as ‘Pro ducer’s’ tables). These can be fitted with either a full-depth flat table or a shorter table and 7U of equipment racking. A 7.2° corner section is also available to create angled frames.

Every C 100 co nsole is fitted with dual redundant power supplies as s tandard. Acc ordingly, there are two separate mains input connectors beneath the console.

The standard moulded end trims can be substituted by a thin trim panel (approximately 8mm) for installations where width is limited.

SSL's Project Engineering Department can provide specific console footprint drawings detailing layout, size and metering options during the specification process.

Page 13