6. SSL Console Channel Dynamics | SSL Console Bundle for MX4 |
Page 15
FAST ATT
Provides a fast attack time (100μs per 40db). When off, a controlled linear attack time of 1.5ms per 40dB is selected.
The attack time is the time taken for the Expander/Gate to ʻrecoverʼ once the signal level is above the threshold.
When gating signals with a steep rising edge, such as drums, a slow attack may effectively mask the initial ʻThwackʼ, so you should be aware of this when selecting the appropriate attack time.
HOLDDetermines the time after the signal has decayed below the threshold before the gate closes. Variable from 0 to
4 seconds.
Note that when the Dynamics Section is not in circuit, its side chain input is also bypassed.
Input/Output SectionThe Input and Output Sections consists of a ± 20dB output gain control and a
When using a version with side chain the Input Section contains the SC IN button, which in pressed state forwards the signal from the side chain input to the level control module of the Compressor and Gate/Expander Section.
SC Versions also have an S/C LISTEN button in the Output Section, which in pressed state routes the side chain audio directly to the output, so you can monitor and audition the side chain signal easily.
Both Input and Output Gain Controls always apply Level Control to the Audio Input, not the side chain Signal.