Locating your Cinema Two SUBs near a corner and close to the floor (Diagrams 1 and 2) provides the acoustic reinforcement necessary to maximize efficiency and bass extension. The precise location of your SUBs will be dictated by the space requirements of the included back boxes. Cinema Two SUBs must be installed with their back boxes, which are integral to the speaker system.

Note the speaker cable size recommendations in the installation instructions. To assure optimum performance of your subwoofers, avoid unnecessarily long cable runs.

The Cinema Two SUB System requires a nominal six inch depth (2" x 6") stud walls thus accommodating the massive magnet structures of their drivers. Due to the high-energy output of which they are capable, the Cinema Two SUBs must be installed with their 72" tall back boxes.

Diagram 2

INSTALLATION QUICK STARTRead “Getting The Most From Your Cinema Speakers” and plan speaker locations.

If this is your first installation of a Sonance Cinema system, read all of the installation instructions before beginning.

The following gauge quality speaker wire is recommended for the Cinema Two SUBs•14 gauge for less than 30 feet•12 gauge for between 30 and 75 feet•10 gauge for greater than 75 feetVerify adequate parts and tools for the installation:PARTS LIST / TOOL LIST • CINEMA TWO SUB

NEW CONSTRUCTION

RETROFIT

 

 

PARTS

2 Cinema Two SUB speakers

2 Grilles

12 #8 x 3" mounting screws

2 Grille mounting rings

2 Back Boxes

8 Angle brackets

TOOLS

Electric Drill (1/4" - 3/8" drive)

1" Flat Bit

3/8" Bit

Stiff Wire (coathanger, fishtape)

Torpedo Level

Wire Strippers

Keyhole or Drywall Saw

Gloves

Pencil

Installation with back box

9

10