SONANCE SYMPHONY® TR & TSQ
| • If | you’re using the speakers | in stereo or as the front left/center/right speakers |
in | a home theater, pivot the | woofer and/or tweeter directly towards the listen- |
ing area. This will help the sound from the speakers blend into a solid sound- stage even if the speakers are widely separated.
•If you’re using the speakers as surround channel speakers in a home theater, you can create a more diffuse, spacious surround effect by aiming the woofers and/or tweeters towards a wall or window, away from the listeners.
To Pivot the
Woofer:
Apply pressure on the outer edge of the tweeter support bracket, as shown in Figure 8. Do not touch or apply pressure to the woofer cone.
To Pivot the |
|
| ||||
Tweeter: |
|
| Pivoting the Woofer Pivoting theTweeter | |||
| Apply light | pressure | to | ||||
| F i g u r e 8 : | ||||||
the | plastic | ring around | ||||
the | outside | edge | of | P i v o t i n g t h e W o o f e r a n d T w e e t e r | ||
the | tweeter | dome, | as |
| ||
Tweeter Level Control
The S625TR, S624TR, S623TR and S623TSQ have a tweeter level control switch (see Figure 9) that lets you boost or cut the tweeter’s level by 3dB. This allows you to adjust the speaker’s brightness to better match
your listening room or personal taste.Once you have installed the speakers, listen to a variety of music that you are familiar with. If the music all tends to sound too bright or dull, use the Tweeter Level Control to compen-
sate. If some recordings sound dull and some sound bright the speaker is accurately reproducing differences in the recordings, and you should leave the control in the middle (0dB) position.
SPECIFICATIONS
S625TR
Tweeter : | 1" (25mm) Beryllium dome, | ||||
Woofer : | 6½" (165mm) Beryllium cone, rubber surround, pivoting | ||||
Frequency Response: | 40Hz | – 20kHz |
| ±3dB | |
Impedance: | 6 | Ohms nominal; 4 Ohms minimum | |||
Power Handling: | 5 | watts minimum; 150 Watts maximum | |||
Sensitivity: | 90dB SPL (2.83V 1 meter) | ||||
Adjustments: | ±3dB Tweeter | level | |||
Dimensions (Dia. x Depth): | 9¾" | (248mm) | x | 5 3/ " (132mm) | |
|
| 5/ " |
|
| 16 |
Cutout Diameter : | 8 | (207mm) |
|
| |
|
| 32 |
|
|
|
Shipping Weight: | 12 lbs. (5.45kg) | Pair | |||
S624TR
Tweeter : | 1" (25mm) Aluminum dome, | ||||
Woofer : | 6½" (165mm) Coated carbon fiber cone, rubber surround, pivoting | ||||
Frequency Response: | 43Hz | – 20kHz | ± 3dB | ||
Impedance: | 6 | Ohms nominal; 4 Ohms minimum | |||
Power Handling: | 5 | watts minimum; 140 Watts maximum | |||
Sensitivity: | 90dB SPL (2.83V 1 meter) | ||||
Adjustments: | ±3dB Tweeter | level | |||
Dimensions (Dia. x Depth): | 9¾" | (248mm) | x | 5 3/ " (132mm) | |
|
| 5/ " |
|
| 16 |
Cutout Diameter : | 8 | (207mm) |
|
| |
|
| 32 |
|
|
|
Shipping Weight: | 11 lbs. (5.0kg) | Pair | |||
S623TR
Tweeter : | 1" (25mm) Silk dome, | |||
Woofer : | 6½" (165mm) Carbon fiber cone, rubber surround, pivoting | |||
Frequency Response: | 43Hz | – 20kHz | ±3dB | |
Impedance: | 8 | Ohms nominal; 6 Ohms minimum | ||
Power Handling: | 5 | watts minimum; 135 Watts maximum | ||
Sensitivity: | 90dB SPL (2.83V 1 meter) | |||
Adjustments: | ±3dB Tweeter | level | ||
Dimensions (Dia. x Depth): | 9¾" | (248mm) | x 5 3/ " (132mm) | |
|
| 5/ " |
| 16 |
Cutout Diameter : | 8 | (207mm) |
| |
|
| 32 |
|
|
Shipping Weight: | 10 lbs. (4.5kg) | Pair | ||
S622TR
Tweeter : |
| 1" (25mm) Silk dome, | |||
Woofer : |
| 6½" (165mm) Polypropylene cone, rubber surround, pivoting | |||
Frequency | Response: | 45Hz | – 20kHz | ±3dB | |
Impedance: |
| 8 | Ohms nominal; 6 Ohms minimum | ||
Power Handling: | 5 | watts minimum; 125 Watts maximum | |||
Sensitivity: |
| 89dB SPL (2.83V 1 meter) | |||
Dimensions | (Dia. x Depth): | 9¾" | (248mm) | x 5 3/ " (132mm) | |
|
|
| 5/ " |
| 16 |
Cutout Diameter : | 8 | (207mm) |
| ||
|
|
| 32 |
|
|
Shipping Weight: | 10 lbs. (4.5kg) | Pair | |||
S621TR
Tweeter : |
| ¾" (19mm) Silk dome, | |||
Woofer : |
| 6½" (165mm) Polypropylene cone, rubber surround, pivoting | |||
Frequency | Response: | 50Hz | – 20kHz | ±3dB | |
Impedance: |
| 8 | Ohms nominal; 6 Ohms minimum | ||
Power Handling: | 5 | watts minimum; 100 Watts maximum | |||
Sensitivity: |
| 88dB SPL (2.83V 1 meter) | |||
Dimensions | (Dia. x Depth): | 9¾" | (248mm) | x 5 3/ " (132mm) | |
|
|
| 5/ " |
| 16 |
Cutout Diameter : | 8 | (207mm) | |||
|
|
| 32 |
|
|
Shipping Weight: | 9 | lbs. (4.1kg) | Pair | ||
S623TSQ
Tweeter : | 1" (25mm) Silk dome, | ||||
Woofer : | 6½" (165mm) Carbon fiber cone, rubber surround, pivoting | ||||
Frequency Response: | 43Hz | – | 20kHz | ±3dB | |
Impedance: | 8 | Ohms nominal; 6 Ohms minimum | |||
Power Handling: | 5 | watts minimum; 135 Watts maximum | |||
Sensitivity: | 90dB SPL (2.83V 1 meter) | ||||
Adjustments: | ±3dB Tweeter | level | |||
Dimensions (Dia. x Depth): | 9¾" | x | 9¾” x | 413/ " (248mm x 248mm x 122mm) | |
|
| 5/ " |
| 8 5/ " | 16 |
Cutout Diameter : | 8 | x | (207mm x 207mm) | ||
|
| 32 |
| 32 |
|
Shipping Weight: | 10 lbs. (4.5kg) | Pair | |||
3