2.Enter the LAN IP Address of your SonicWALL in the IP Address field.
3.Enter the SonicWALL serial number in the Serial Num- ber field. The 12 character, alphanumeric serial number is displayed on the General Status window of the SonicWALL Web Management Interface.
Note: The Serial Number field is not case sensitive.
4.Enter the current SonicWALL administrator password in the Old Password field.
5.Enter the new SonicWALL administrator password in the New Password and Confirm New Password fields.
Note: This password must match the password of your SonicWALL.
Note: When setting the SonicWALL administrator password for the first time, remember that the default SonicWALL administrator password is “password”.
Click the Update button to update the configuration. Then logout of ViewPoint and reauthenticate in order for these changes to take effect.
Note: If you lose or forget the password that had been defined in the SonicWALL Configuration window and ViewPoint cannot authenticate to your SonicWALL, you will need to uninstall and reinstall the ViewPoint software, and then define the correct SonicWALL administrator password.
Page 17