Prepare the battery pack
1Insert the battery pack.
Push the battery pack until it clicks.
2 Connect the power cord (mains lead).
CHARGE lamp
Power cord (mains lead)
Battery charger
Light on: Charging | 3 To wall outlet |
Light off: Completed (Normal Charge) | (wall socket) |
If you continue charging the battery pack for about one more hour until it is fully charged (Full Charge), the charge will last slightly longer.
•Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
•Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
•When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.
•The time required to fully charge the battery pack (supplied) (Full Charge) from when it is completely discharged at a temperature of 25°C (77°F) is approximately 235 min., and the Normal Charge time is approximately 175 min. Charging may take longer under certain circumstances or conditions.
4Insert the charged battery pack.
While sliding the battery cover open lever, open the battery cover.
Lock lever |
|
Firmly insert the battery pack all | Close the cover. |
the way while pressing the lock |
|
lever with the tip of the battery. |
|
4