To set the aspect ratio according to the connected TV (16:9/4:3)
Change [TV TYPE] setting to match your TV (p. 67).
bNote
•When you play back a tape recorded in the DV format on a 4:3 TV not compatible with the 16:9 signal, set [DV WIDE REC] to [OFF] on your camcorder when recording a picture (p. 67).
zTip
•When your TV is monaural (When your TV has only one audio input jack), connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or the red (right channel) plug to the audio input jack of your TV or VCR. When you want to play the sound in monaural mode, use a connecting cable for that purpose.
: Signal flow
Type Camcorder | Cable | TV | Menu Setting |
|
|
|
|
Recording/Playback
D | (supplied)Component video cable | |
2 | ||
|
| (Green) Y |
|
| (Blue) PB/CB |
|
| (Red) PR/CR |
3 | A/V connecting cable |
|
(supplied) | (Red) | |
|
| |
|
| (White) |
|
| (Yellow) |
bNote
(IN/OUT REC) menu t
[VCR HDV/DV] t [AUTO] (p. 66) [COMPONENT] t [576i] (p. 67)
[TV TYPE] t [16:9]/[4:3]* (p. 67)
•A/V connecting cable is also needed to output audio signals. Connect the white and red plugs of the A/V connecting cable to the audio input jack of your TV.
E |
| (IN/OUT REC) | |
| menu t | ||
|
| [VCR HDV/DV] t | |
4 | i.LINK cable (optional) | [AUTO] (p. 66) | |
[i.LINK CONV] t | |||
|
| ||
|
| [ON] (p. 67) |
bNotes
•The TV needs to be set so that it recognizes that the camcorder is connected. See the instruction manuals supplied with your TV.
•This camcorder has a
Continued , 51