Files cannot be played back.
USB storage media formatted with file systems other than FAT16 or FAT32 are unsupported.*
If you use partitioned USB storage media, only files on the first partition can be played.
Files that are encrypted or protected by passwords, etc. cannot be played back.
*This system supports FAT16 and FAT32, but some USB storage media may not support all of these FAT. For details, see the operation manual of each USB storage media or contact the manufacturer.
Picture
There is no picture.
Press FUNCTION +/repeatedly to select “DVD” (or press DVD on the unit).
Check that the system is connected securely.
The video cord is damaged. Replace it with a new one.
Make sure you connect the unit to the video input jack of your TV (page 20).
Make sure you turn on the TV and operate the TV correctly.
Press PROGRESSIVE on the unit repeatedly to select “INTERLACE” if you connect your TV to the unit’s COMPONENT VIDEO OUT jacks and your TV cannot accept progressive signal.
You have set to progressive format but your TV cannot accept the signal in progressive format. In this case, set to interlace format (the default setting) (page 21).
Even if your TV is compatible with progressive format (525p/625p) signals, the image may be affected when you set to progressive format. In this case, set to interlace format (the default setting) (page 21).
Make sure you select the video input on the TV so that you can view the pictures from the system.
Make sure you set the color system correctly, according to your TV’s color system.
Make sure you connect the unit and your TV using only the supplied video cord.
Picture noise appears.
Clean the disc.
If video signal from your system has to go through your VCR to your TV, the
Information Additional
Continued