Precautions
Discs that this system CANNOT play
Discs of
Discs that have adhesive tape, paper, or sticker attached to them
Rental or used discs with attached seals where the glue extends beyond the seal
Discs that have labels printed using ink that feels tacky when touched
Notes on discs
Before playing, wipe the disc with a cleaning cloth from the center out to the edge.
Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or
Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.
Do not use discs encircled with a protection ring. This may cause a malfunction to the system.
On operating voltage
Before operating the system, check that the operating voltage of the unit is identical with the voltage of your local power supply.
On safety
The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall socket, even if the unit itself has been turned off.
Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself.
Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again.
The AC power cord can be changed only by a qualified service facility.
On placement
Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light.
Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result.
If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the DVD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates.
Information Additional
Continued