Yamaha RX-V730 IMPEDANCE SELECTOR switch, switch only when this unit is in the standby mode

Ek'!".t=rzlN:1:B.'!_lll]"

• IMPEDANCE SELECTOR switch

WARNING

Do not change setting of the IMPEDANCE SELECTOR switch when the power of this unit is on, this may damage

the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE

SELECTOR switch may not be fully slid to either position. If so, slide the switch all the way to either position when this unit is in the standby mode.

Select the switch position (left or right) according to the impedance of the speakers in your system. Be sure to move this

switch only when this unit is in the standby mode.

IMPEDANCE
SELECTOR	Switch	Speaker
switch	position
		Main

Impedance level

If you use one set of main speakers, the impedance of each speaker must be 4 _ or higher.

If you use two sets of main speakers, the impedance of each speaker must be 8 _ or higher.

Left	Center	The	impedance	must be 6 _		or
		higher.
	Rear	The	impedance	must be 6 _		or
	Center	higher.
	Rear	The	impedance	of each	speaker		must
		be 6 _ or higher.
		If you use one set of main speakers,
		the impedance of each speaker must
		be 8 _ or higher.
		If you use two		sets of main		speakers,
	Main	the impedance		of each	speaker		must
		be 16 _ or higher.
		[Canada model		only]
(U.S.A. model)		The	impedance	of each	speaker		must
Right		be 8 _ or higher.
	Center	The	impedance	must be 8 _		or
		higher.
	Rear	The	impedance	must be 8 _		or
	Center	higher.
	Rear	The	impedance	of each	speaker		must
		be 8 _ or higher.

12