Yamaha RX-V730 owner manual Esce_, •1A CENTER center speaker mode, Lfel,U,,__L, Lfeleuel

I-'1-'illt_1,ti'I

Depending on the item, press A/v to select a sub item.

2 LFEL,U,,'''__L

SPEAKER	OdE:
÷ HE ¢ff:,F'HONE ....	OdB

[] Press < / > repeatedly to change the setting of the item.

A

2 LFELEUEL

SF'EAEER	E_dE:
÷ HErB, PHONE..	-i IdB

v

[] Press A/v repeatedly until the menu

disappears or simply press one of the DSP program group buttons to exit SET MENU.

A

<	>	or	[%q I%q
			%/_2°_
			ESC]E_

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is in the standby

mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the items again.

Use this feature to select suitable output modes for your speaker configuration.

•When 96-kHz sampling digital signals are input to this unit, some items are not affected.

•When 6CH INPUT is selected as the input source, level adjustments in items 1A through 1E are not affected.

•1A CENTER (center speaker

mode)

By adding a center speaker to your speaker configuration,

this unit can provide better dialog localization for several

listeners and superior synchronization of sound and images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The entire range of the center channel signal is directed to the center speaker.

SML

Select this if you have a small center speaker. The low-

frequency signals (90 Hz and below) of the center channel are directed to the speakers selected with "IE BASS".

NON

Select this if you do not have a center speaker. All of the center channel signal are directed to the main left and right speakers.

42