Yamaha RX-V730 ii;r E E0, •Virtual CINEMA DSP, •Silent Cinema Dsp, •Normal stereo reproduction

•Playing Dolby Digital Surround EX or DTS ES software

Press EX/ES to turn on the Dolby Digital EX or DTS-ES

compatible decoder.

The MATRIX indicator lights up.

!F

EX/ES

MArx W_CVR VCRI V-AUX_W/C_ OVO M0/C_ TUNER

MOVIETHTRI

...........,"1

The display changes AUTO _ Matrix6.1 _ OFF each time the EX/ES button is pressed.

AUTO:	This	mode	automatically			switches		Dolby
	Digital EX and DTS-ES compatible
	depending		on	the signal. Rear			center		speaker
	does	not work		for	5.1	channel	sources.
Matrix6.1:	This	setting produces 6-channel playback of
	the input source using the Dolby Digital EX
	or DTS-ES		compatible			decoder.	The		rear
	center speaker can be used when playing a
	5.1-channel		source.
OFF:	Rear	center	speaker		does not work			in this
	setting. (Except for when the DSP program
	"6ch"	is selected.)

•No sound will be output from the rear center speaker if you have set "IC REAR LR" or "ID REAR CT" on the SET

MENU to NON.

•The setting becomes AUTO once this unit turns into standby mode.

•Some Dolby Digital Surround EX or DTS ES software may not

contain the signal that is necessary for this unit to switch to the

Dolby Digital EX or DTS-ES compatible decoding mode. To

turn on the decoder when playing such a source, select "Matrix6.1 ".

•Virtual CINEMA DSP

With	Virtual		CINEMA		DSP,	you	can enjoy	all DSP
programs		without		rear	speakers.		It creates	virtual	speakers
to reproduce			a natural		sound	field.
You	can listen		to	virtual	CINEMA		DSP by	setting	"IC
REAR LR" in the SET MENU to NON. Sound field
processing		changes		to	VIRTUAL		CINEMA	DSP
automatically.

•This unit is not set in the virtual CINEMA DSP mode even if

"IC REAR LR" is set to NON in the following cases:

-when the 6ch Stereo, DOLBY DIGITAL Normal, Pro Logic

Normal, Pro Logic lI, or DTS Normal program is selected;

-when the sound effect is turned oft';

-when 6CH INPUT is selected as the input source;

-when 96-kHz sampling digital signals are input to this unit;

-when using the test tone; or

-when connecting the headphones.

•SILENT CINEMA DSP

You

can

enjoy

a

powerful

sound

field

similar

to what

you

could

expert from

actual

speakers

with SILENT

CINEMA

DSE

You

can

listen

to

SILENT

CINEMA

DSP

by connecting

your

headphones

to

the

PHONES

jack

while

the

digital

sound

field processor

is

on. Enjoy

all the

DSP

program

using

the

headphones.

The

"SILENT"

indicator

lights

up

on the

front

panel

display.

(When

sound

effects

are

off,

you

listen

to

the

source

with normal

stereo

reproduction.)

•This feature is not available when 6CH INPUT is selected or

96-kHz sampling digital signals are input to this unit.

•The sound of LFE channel will be mixed and output from the headphone.

•Normal stereo reproduction

•Press STEREO to turn off the sound effect

for normal stereo reproduction.

Press STEREO again to turn the sound effect back on.

STEREO	STEREO
Front panel	Remote control

:ii;r E E0

•If you turn oft" the sound effects, no sound is output from the center speaker, rear speakers, or rear center speaker.

•If you turn off the sound effects while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is

automatically compressed and the sounds of the center and rear

speaker channels are mixed and output from the main speakers.

•The volume may be greatly reduced when you turn off the

sound effects or if you set "4 D. RANGE" on the SET MENU to MIN. In this case turn on the sound effect.

•The sound of LFE channel will be directed to the main left and

right or the subwoofer (or both) channels depending on the setting of "IE BASS" on the SET MENU.

During stereo reproduction, you can display information such as

the type, format and sampling frequency of the signal input from

the components connected to this unit.

(While playing a source) Press AMP.

[] Press v to display the information about the input signal.

29