Yamaha RX-V730 •BGV background video function, •To mute the sound, on the source component

Start playback or select a broadcast station

on the source component.

Refer to the operation instructions for the

component.

Adjust the volume to the desired level.

The volume level is displayed digitally.

Example:	-70	dB
Control range: VOLUME MUTE (minimum) to
	0 dB	(maximum)

The volume level indicator also shows the current

volume level as a bar graph.

If desired, use BASS and TREBLE. These controls only effect the sound from the main speakers.

or

BASSTREBLE

Remote control

Front panel

•If you increase or decrease the high-frequency or the low- frequency sound to an extreme level, the tonal quality from the center and rear speakers may not match that of the main left and right speakers.

•If you have connected a recording component to the VCR 1 OUT, VCR 2/DVR OUT, or MD/CD-R OUT jacks, and you notice distortion or low volume during playback of other components, try turning the recording component on.

[] Select a DSP program if desired.

Use PROGRAM <3 / [> (DSP program buttons on the remote control) to select a DSP program. See pages 30 to 34 for details about DSP programs. When using the remote control, press AMP before selecting a DSP program.

or _ _1 _I _

Front panel Remote control

•BGV (background video) function

The BGV function allows you to enjoy video images from a video source together with sounds from an audio source. For example, you can enjoy listening to classical music while having beautiful scenery from a video source on the video monitor.

Select a source from the video group, then select a source from the audio group using the input selector buttons on the remote control. BGV selections cannot be made with

INPUT <3 ! l> on the front panel.

PHONO

•To mute the sound

• Press MUTE on the MUTE

remote control.

To resume the audio output, press MUTE again.

_%-

•You can also cancel mute by pressing VOL +/-, etc.

•During muting, the "MUTE" indicator flashes on the front panel display.

•When you have finished using

this unit

• Press STANDBY/ON (STANDBY on the remote control) to set this unit in the standby mode.

STANDBY

Front panel Remote control

25