Yamaha RX-V730 owner manual Max, Std, Press repeatedly to exit from Input, Rename

Use this feature to adjust the dynamic range. This setting is effective only when this unit is decoding Dolby Digital signals.

Choices: MAX, STD (standard), MIN (minimum)

MAX

Select the "MAX" for feature films.

STD

Select the "STD" for general use.

MIN

Select the "MIN" for listening to sources at low volume levels.

Use this feature to change the name of the input which

appears on the OSD or the front panel display.

[] Press an input selector button to select the input you want to change the name of.

[;,_.[;, ÷ DHC,

<.._> : P o s i t i o n A.._v ; Ci-_aract.er

[] Press ( / ) to place the _ (under-bar) under the space or the character you want to edit.

Use this feature to adjust the balance of the output level from the main left and right speakers.

Control range: 20 steps for L/R

Initial setting: 0 dB for L/R

•Press ) to decrease the output level for the main left speaker. Press ( for the main right speaker.

Use this feature to adjust the level of the bass and treble when you use your headphones.

Control	range (dB):
BASS		-6	to +3
TRBL (treble)		.. -6	to +3
Initial	setting:
BASS		0 dB
TRBL		0 dB

[;, _._[;, ÷ DHC,

<.._> : P o s i t i o n A,'_v ; Ci-_aract.e!-

lr¢] Press A/V to select the character you want

to use and ( / ) to move to the next one.

•Press v to change the character in the following order, or press A to go in the reverse order.

A to Z, a space, 0 to 9, a space, a to z, a space, #,

• , +, and so on.

•Follow the foregoing procedure to rename other inputs.

C,L_C, ÷ DHC, I

<.._> : P o s i t i o n A,'_v ; Ci-_aract.e!-

•You can use up to 8 characters to rename the inputs.

[] Press ) repeatedly to exit from INPUT

RENAME.

45