Yamaha RX-V730 owner manual •Notes on batteries, Insert the four supplied batteries AAA, R03

Check your package to make sure it contains the following items.
Remote	control	Batteries (4)	AM loop antenna
		(AAA, R03, ua-4)
0000
0000
0000
			Indoor FM antenna
[]	Qr_	Front VIDEO AUX jack cap	(U.S.A., Canada, China,
			Korea and General models)

		75-ohm/300-ohm antenna	(Europe, U.K., Australia and
Fq	r=n r=n r=n	adapter (U.K. model)	Singapore models)
rqn	rqn E23 EE3
	_M

Insert the batteries in the correct direction by aligning the

+and - marks on the batteries with the polarity markings (+ and -) inside the battery compartment.

•Notes on batteries

°Change all of the batteries if you notice a decrease in the operating range of the remote control, that the

indicator does not flash, or the light becoming dim.

°Do not use old batteries together with new ones.

°Do not use different types of batteries (such as alkaline

and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

°If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean

the battery compartment thoroughly before installing new batteries.

If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new

batteries, set up the manufacturer code and program any acquired functions that may have been cleared.

[] Press the _ part and slide off the battery compartment cover.

[] Insert the four supplied batteries (AAA, R03,

UM-4) according to the polarity markings on the inside of the battery compartment.

Slide the cover back on so that it snaps into place.

3