Programming recordings with the GUIDE Plus+® System

The GUIDE Plus+® System has made it even easier to programme recordings. All you have to do is select the show you want to record from a channel listing.

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Press GUIDE/TV on the remote control.

3Use P+ A or P- B to select the TV station, and D or C to select the show to record.

aI do not see all available TV channels

 

b Please check your correct channel line up in the 'Editor' screen.

 

Read therefore the section 'The 'Editor' screen in the chapter 'The GUIDE

 

Plus+® system.

 

b The GUIDE Plus+® 'Grid' screen contains only those TV channels that

 

were detected by the GUIDE Plus+® system using a 'channel identification'.

 

TV channels that do not have this 'channel identification' are not available in

 

the GUIDE Plus+® system.

 

Please use 'Manual TIMER programming' to program TV shows of such TV

Problem

channels.

4Confirm using the red function button of the remote control ('Record' on the screen).

You can also use REC/OTR n on the remote control or RECORD on the DVD recorder.

The TV show is programmed for recording. Read the information on the screen.

a'Warning, this programme number has not been allocated, please

go to Editor to set it.' appears on the screen

b The programme number of the TV channel is not available in the GUIDE Plus+® system or allocation is wrong.

To change or check the channel data, proceed as follows:

1Press P+ A .

2Select 'Editor' with C .

3Select the TV channel using P- B or P+ A .

4 Press C to go to the right tile.

In case you can receive the selected channel only via an external receiver, press the red button to select the corresponding source.

5 Press the green button.

6 Enter the programme number of the TV channel using the number buttons.

If the source you

have selected is an external receiver, enter the

programme number

that you would also enter at the external receiver

for this TV channel.

Problem

88

Programming a recording (TIMER)

 

Page 98
Image 98
Philips DVDR80 manual Programming recordings with the Guide Plus+ System, Programming a recording Timer