Philips DVDR80 manual Allocating a decoder, How do I allocate the decoder for Easy Link?

Installation

Manual search
Channel/freq.	CH
Entry/search	01
Programme number	01
TV channel name	BBC1
Decoder	Off
TV system	PAL-BG
NICAM	On
Fine tuning	0
	To store
	Press OK

Allocating a decoder

Some TV channels send coded TV signals that can only be viewed properly with a purchased or rented decoder. You can connect such a decoder (descrambler) to your DVD recorder. The following function automatically activates the connected decoder for the TV channel you want to watch.

How do I allocate the decoder for Easy Link?
If your TV set supports 'Easy Link' the decoder must be assigned to the
relevant TV channel on the TV set (see the operating instructions for your TV	?
set). Settings cannot then be made in this menu.

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Switch on the DVD recorder using STANDBY-ONm .

3Use the P+ A and P- B buttons or the number buttons 0..9 on the remote control to select the TV channel for which you want to use the decoder. If necessary, use the MONITOR button to switch to the internal tuner.

4Press the SYSTEM-MENUbutton on the remote control. The menu bar appears.

5Select 'A' symbol with D or C .

6Select 'Installation' using P- B or P+ A and confirm with C .

7Select 'Manual search' using P- B or P+ A and confirm with C .

8Select 'Decoder' using P- B or P+ A .

9Select 'On' with D or C .

How do I switch the decoder off again?	?
Use C to select 'Off' in the 'Decoder' line on the screen (Decoder off).

0Confirm with OK .

ATo end, press SYSTEM-MENU .

Your decoder has now been allocated to this TV channel.

26 Installing your DVD recorder