Philips DVDR80 Selecting a TV channel from the listing, Using Or P+ a, Qual. Red function button

Quality		Frequency		VPS/PDC		Home
Recording quality M2, Recording quality M2
Grid		Search		Schedule		Info
Watch/Record					Qual.	Freq. Timing
21-Oct	20:00 21:30		BBC1		M2	Once +0

8Check the data you entered.

If necessary, go back a position to change entered data using the green function button.

9Enter the programme number of the TV channel using the number buttons 0..9

Selecting a TV channel from the listing

You can only use this function if data from the GUIDE Plus+® system is already available.

1Press the yellow function button. You will see an overview of all channels

2Select the TV channel you want to program using D , C , P- B , P+ A . You can browse back or forth using O , N .

3Confirm with OK .

Programme numbers of the scart sockets 'EXT1', 'EXT2' and the front sockets '￿￿￿￿', '￿￿￿￿'

You can also program recordings from external sources.

1	Select	the	corresponding input socket		using	P- B or P+ A .	'EXT1'
	( EXT	1	TO	TV-I/O ), 'EXT2'	( EXT	2 AUX-I/O ),	'￿￿￿￿'
2	( S-VIDEO and			VIDEO ), '￿￿￿￿' ( DV IN ).
	Confirm with OK .						Tip

Changes using the colour buttons

You can use the colour function buttons to make the following settings. Make sure that the right tile is selected.

'Qual.': Red function button

Select the recording quality

'Frequency' : Green function button

'Once': single recordings

'M-F': Repeated daily recordings (Monday to Friday).

'Mon': Repeated weekly recordings (every week on the same day, e.g. Monday).

Activate VPS/PDC ('Timing'): Yellow function button

Using this button, you can activate (appears)

or deactivate ('VPS/PDC' disappears)Tip 'VPS/PDC' in tile 'Timing'

0To find out how you can go back and change the data, read the section on 'How to change or delete a programmed recording (TIMER)'

.

AInsert a DVD ready for recording (not locked). The inserted disk is checked.

BSearch the position on the disc where the recording should begin.

CSwitch off the DVD recorder using STANDBY m .

The programmed recording functions only if the DVD recorder has been switched off using STANDBY m .

If one or more recordings have been programmed 'TIMER' will light up on the display.

92 Programming a recording (TIMER)