Philips DVDR80 manual Messages in the DVD recorder display, Maximum number of titles on a disc is

Messages in the DVD recorder display

￿￿￿￿￿￿￿	The following messages may appear in your DVD recorder display
	￿￿ ￿￿ ￿￿￿	The DVD recorder is in initial installation mode. Switch the TV on, then
		read the paragraph on 'Initial installation' in 'Installing your DVD
		recorder'.
	￿￿ ￿￿￿￿￿￿	No input signal available (signal inadequate or unstable)
	￿￿￿￿	The menu on the screen is active
	￿￿￿￿￿￿￿	Disc tray opening
	￿￿￿￿ ￿￿￿￿	Disc tray open
	￿￿￿￿￿￿￿	Disc tray closing
	￿￿￿￿￿￿￿	Disc being read
	￿￿￿￿ ￿￿￿￿	Once recording has been successfully completed the table of contents is
		created.
	￿￿￿￿ ￿￿￿￿	The menu structure is created after the first recording has been made
		on a new disc
	￿￿￿￿ ￿￿￿￿	You received a copy-protected signal. This may come from a
		copy-protected DVD/videotape of a DVD/video player or from a TV
		channel.
	￿￿￿￿	Please wait until this message disappears. The DVD recorder is busy
		performing a task.
	￿￿ ￿￿￿￿	A disc has not been inserted for recording. If a disc has been inserted, it
		cannot be read.
	￿￿￿￿	Information about the inserted DVD is displayed on the screen
	￿￿￿￿	The DVD recorder is processing the changes to make them DVD
		compatible
	￿￿￿￿￿￿￿	The entire disc is erased
	￿￿￿￿￿￿￿￿￿	The disc inserted is either new or has been completely erased (no
		recordings).
	￿￿￿￿￿￿￿￿￿	The disc is protected against recording.
	￿￿￿ ￿￿￿￿￿	The maximum number of titles per disc has been reached. The
		maximum number of titles on a disc is 48.
	￿￿￿ ￿￿￿￿	The maximum number of chapters within a title/or the disc has been
		reached. The maximum number of chapters within a title is 99, on a disc
		124.
	￿￿￿￿ ￿￿￿￿	The disc is full. There is no space for new recordings