Philips DVDR80 manual Setup screen, Entering the TV of an external receiver

Home

Setup your system to receive GUIDE Plus+ data.

Schedule Info Editor Setup

Setup

View Demo

Entering the TV of an external receiver

1Select the TV channel you want to watch only through the external receiver using P- B , P+ A .

2Choose the corresponding source using the red function button.

This function button is only available when at least one external receiver has been installed. Read section 'Setting up the GUIDE Plus+® system' on how to install an external receiver.

3Press the green function button. Enter the programme number of the TV channel which you would also enter for this TV channel on the external

receiver. Tip

Please observe that in the case of modified TV channels, the transfer of GUIDE Plus+® channel data may take up to 24 hours.

The 'Setup' screen

Here you can make or change the basic settings such as language, country, external receiver. Moreover, you can watch an automatic demonstration of the GUIDE Plus+® system.

'Setup'

All the settings you have already made are displayed here. Select the desired line using P- B or P+ A and confirm with OK . For more information on the settings, read section 'Setting up the GUIDE Plus+® system' in chapter 'The GUIDE Plus+® system'.

'View Demo'

Here you can view a demonstration of the different functions of the GUIDE Plus+® system. Start the automatic presentation with OK .

If you start the demonstartion, programmed recordings can be deleted.

If you cancel the presentation by pressing OK , you will go directly to the setup menu.

50 The GUIDE Plus+® System