Philips DVDR80 manual Manual TV channel search, Manual search with EasyLink

9Use a component video (Y Pb Pr) cable, connect the three cinch sockets (red, blue, green) COMPONENT VIDEO OUT at the back of the DVD recorder with the corresponding three component video input sockets of your TV set, usually labelled 'Component Video Input', 'YUV Input', 'YPbPr', 'YCbCr' or simply 'YUV'.

Warning!

Do not confuse these sockets with the five-component RGB sockets (if available) or the yellow video (CVBS/FBAS) socket and the two audio sockets (red/white). The five-component RGB sockets are only provided for the R-G-B-H-V signals (red, green, blue with horizontal and vertical synchronisation impulse).

Please observe the colour sequence
The colours of the sockets at the DVD recorder and the connectors must
match	those	of	the	socket	colours	at	the	TV	set
(red-red/blue-blue/green-green). If they don't, the colours of the picture may										Tip
get mixed up or the picture may not be visible.

0Use an audio (cinch) cable, connect the red/white cinch socket OUT AUDIO L/R at the back of the DVD recorder with the mostly red/white audio input socket of your TV set (usually labelled 'Audio in' or 'AV in'. See the instruction manual of your TV set.)

AIf necessary, switch your TV set to the component video input socket. Also consult the instruction manual of your TV set.

BThe menu of the DVD recorder should now appear on the TV screen. If not, check the cable connections and the settings on your TV set.

Manual TV channel search

In some cases, not all of the available TV channels may have been found and stored during initial installation. In this case, you will need to search for and store the missing or coded TV channels manually.

Manual search with EasyLink
With 'Easy Link', the DVD recorder will automatically download the TV
channels stored on the TV set. This is why some lines have no function. To
store new TV channels, they must first be stored on the TV set. The	Tip
information will then be transferred to the DVD recorder automatically.

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2 Switch on the DVD recorder using STANDBY-ONm .

28 Installing your DVD recorder