Philips DVDR80 manual Installation of the External receiver, Which types can I choose?

Setup Home

Press Aor Bto select. Then press OK to confirm.

Setup
Choose item to set up :
Language	English
Country	United Kingdom
Postal code	XXXXX
External receiver 1	None
External receiver 2	None
External receiver 3	None

Installation of the 'External receiver 1'

If you have connected an external receiver (satellite receiver, set-top box, cable TV box), you must also install it in the GUIDE Plus+® system. TV programmes (TV channels) that you can only watch via the receiver can also be displayed in the GUIDE Plus+® system and be programmed for recording.

You can connect up to three external receivers to the DVD-Recorder.

1Select with P- B or P+ A in the 'Setup'screen the line 'External receiver 1' and confirm with OK .

2Read the information on the screen and confirm with OK .

3Select the type of the external receiver. This setting serves to preselect the type used.

Which types can I choose?
This selection depends on the country and the GUIDE Plus+® system
provider. Therefore, some types may have no function.
'Cable': Cable receiver, cable box.
'Satellite': Analogue or digital satellite receiver.
'Terrestrial': Digital terrestrial decoder box.	Tip
'None': No external device connected.

4Confirm with OK .

If you selected 'None', there is nothing further you need to do here. Read on in the section entitled 'Continue set-up'.

Otherwise, you should continue here.

5Select your provider from the list. If you do not have a provider, select 'No provider'

6Confirm with OK .

7Select the brand of your external receiver from the list. If, additionally your provider is printed on your receiver (e.g. Sky,...), you must choose the provider as brand. Depending on the type and provider you selected, a limited selection will appear.

Browse through the pages of the list using O , N .

aMy brand is not included in the list

b Select 'Satellite' and as provider 'No provider'. You will see a list of all stored brands.

b If you do not find your brand, please proceed as follows:

1Select 'None'. You will find this setting at the end of the list.

2Please note the type and manufacturer of your external receiver and call the customer support service in your country. You will find the telephone number on the back of this instruction manual.

3The control data of the external receivers are automatically updated

(completed) via the GUIDE Plus+® system. This is done through the
aerial, the cable, or the external receiver. You do not need to bring the	Problem
device to a service centre.

8 Press OK .

40 The GUIDE Plus+® System