Philips DVDR80 manual Automatic recording from a satellite receiver Sat recording

Automatic recording from a satellite receiver (Sat recording)

ENGLISH

You can use this function if your own a satellite receiver that can control other devices via a scart cable and a programming function (timer). For more information, please see the operating instructions for the satellite receiver.

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Press SYSTEM-MENUon the remote control. The menu bar appears.

3Select 'A' symbol with D or C .

4 Select 'Record settings' using P- B or P+ A and confirm with

C.

5Select 'Sat record' using P- B or P+ A .

6Select 'EXT2' with D or C .

Switching off 'Sat Recording'	Tip
To switch off the function, select 'Off' using C or D .

7Confirm with OK .

8Use a scart cable to connect scart socket EXT 2 AUX-I/Oon the DVD recorder to the corresponding scart socket on the satellite receiver.

9To end, press SYSTEM-MENU .

0Insert a disc you want to use for recording.

AProgramme the satellite receiver with the required information (programme number of the TV channel, start time, finish time).

If necessary, please see the operating instructions for your satellite receiver.

BSwitch off the DVD recorder using STANDBY m . 'SAT' also appears in the display to indicate that the function is active.

The DVD recorder is now ready to record. The start and end of the recording is controlled via scart cable EXT 2 AUX-I/O .

Manual recording 75