Direct Record

Can you record the right TV channel in seconds when the DVD recorder is switched off? No problem. If recording is started manually, the switched DVD recorder takes the current TV channel from the TV set via the scart cable.

You will find more information on how to switch 'Direct record' on or off in the next section 'Direct record'.

How does Direct Record work?

 

The DVD recorder compares the TV channel selected on the TV set with its

 

stored TV channels via the scart cable. If the same TV channel is found, it

 

switches the DVD recorder to the corresponding programme number and

 

starts recording.

 

Please do not change channel on the TV during the search. This could affect

?

the tuning of the DVD recorder.

1On the TV set, select the programme number you want make the recording from.

2Press REC/OTR n with the DVD recorder switched off.

 

aThe display will read '￿￿￿￿'

 

 

b The DVD recorder is comparing its saved TV channels with those of the

 

 

TV set. Please do not change the TV channel on the TV set while '￿￿￿￿' is

 

 

shown in the display.

 

 

a'￿￿￿￿' appears in the display

 

 

b This TV channel could not be found in the DVD recorder's memory.

 

 

Check that all TV channels saved on the TV set are available on the DVD

 

 

recorder. If required, save any missing channels. Please read 'Manual TV

 

 

channel search' in 'Installing your DVD recorder'.

 

 

b Check the connectors at both ends of the scart cable.

 

 

b Check your TV's operating instructions to see which scart socket is used

 

 

for video signals.

Problem

 

b If the problem persists, you won't be able to use this feature.

3

 

 

Stop recording with STOP h .

 

76

Manual recording

 

Page 86
Image 86
Philips DVDR80 manual How does Direct Record work?, Appears in the display