Philips DVDR80 manual Deleting sorting, Using Standby m

a'￿￿￿￿' will appear in the display. The DVD recorder is not
receiving a video signal from the TV set.
b Chech the connectors at both ends of the scart cable.
b Check your TV's operating instructions to see which scart socket is used
for video signals.
b If the problem persists, you won't be able to use this feature.	Problem
Please read 'Sorting and deleting TV channels manually'.

0Wait until for example '￿￿ ￿￿' appears in the display.

ASelect the next programme number on the TV set, e.g. '2'.

￿￿ ￿￿	B Confirm with OK on the DVD recorder remote control.
		Deleting sorting	Tip
		You can delete incorrect TV channel sorting by pressing D .

CRepeat steps 0to Buntil you have assigned all the TV channels.

ÀTo end, press SYSTEM-MENU .

a'New preset, please switch to standby' appears on the screen

b In order to transfer the new TV channel order to the GUIDE Plus+® system, it is necessary to switch off the DVD recorder ( STANDBY m ). Wait for approx. 4 minutes before you switch the DVD recorder on again. b If this message appears after you switch on the DVD recorder, it was not possible to complete the transfer process. Switch off the DVD recorder

using STANDBY m . Problem

ENGLISH

Installing your DVD recorder 31