Philips DVDR80 manual Connection using a component video, Pb Pr/YUV cable

TV shape

Black level shift

Video shift

Video output

Picture

16:9

Off

ï

RGB + CVBS

	ENGLISH
Connection using a component video
(Y Pb Pr/YUV) cable

Component video (Y Pb Pr) is the highest quality picture transmission option. This is achieved by dividing the video signal into a luminance signal (Y) and two colour difference signals - red minus luminance (U) and blue minus luminance (V). As a rule, "Cr" or "R-Y" is used to describe the red difference signal and "Cb" or "B-Y" the blue difference signal.

These signals are transmitted through separate lines. The connectors of this cable and the corresponding sockets are usually green (luminance), blue (Pb, Cb, B-Y), and red (Pr, Cr, R-Y).

If you choose this type of connection, the DVD recorder must already be connected and completely installed (initial installation complete).

Switching of the signal to the COMPONENT VIDEO OUT sockets is carried out in a menu that is not yet available during the initial installation.

Moreover, the installation of the GUIDE Plus+® system must also be completed (local post code must be entered).

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Switch on the DVD recorder using STANDBY-ONm .

3Press the SYSTEM-MENUbutton on the remote control. The menu bar appears.

4Select 'A' using D oder C and confirm with P- B .

5Select the ' ' symbol using P- B or P+ A and confirm with C .

6Select the line 'Video output' using P+ A or P- B and confirm with C .

7Select your setting with P- B or P+ A .

Which setting should I choose?

Since YPbPr (YUV) signals are not transmitted simultaneously with S-video(Y/C) and video (FBAS/CVBS) signals, you can choose between the two types. The 'RGB' signal is switched off.

'S-video + YPbPr' Component Video (YUV) and S-Video(Y/C).

On the socket OUT S-VIDEO (Y/C) no GUIDE Plus+® menus.

'CVBS + YPbPr'Component Video (YUV) and Video (FBAS/CVBS).

On the socket VIDEO (CVBS) OUT no GUIDE Plus+® menus.

With all other settings, the signal is switched off at the	COMPONENT
VIDEO OUT sockets. This will also be displayed as information on the screen.
For more information on the other settings, read section	'Picture settings'	?
('Video output') in chapter 'User preferences'.

8 Confirm with OK .

Installing your DVD recorder 27