Philips DVDR80 manual Connecting with a scart cable and Easy Link

Connecting with a scart cable and 'Easy Link'

ENGLISH

Your DVD recorder can exchange information with your TV set using 'Easy Link'. Your TV channels can also be transferred in the same order from your TV set to your DVD recorder using 'Easy Link'.

Please see your TV's operating instructions.

Have the following cables ready:

an aerial cable (1, supplied), a mains cable (2, supplied), a special scart cable (3, suitable for Easylink).

1Switch off your TV set.

2Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder.

3Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.

4Plug in a full-pin scart cable (all 21 contacts wired) into the scart socket EXT 1 TO TV-I/Oat the back of the DVD recorder and the corresponding scart socket - suitable for Easylink - at the back of the TV set (see TV set operating instructions).

5Read the next chapter 'Connecting additional devices' on how to connect additional devices (satellite receivers, videorecorders,...) to the input-/output sockets.

6Switch on the TV set.

7Use the supplied mains cable to connect the mains socket 4MAINS at the back of the DVD recorder with the wall outlet.

The most important features of the DVD recorder will appear in scrolling text on the display. After the first installation is completed this function will be switched off. How you switch on this function again, read in the chapter 'User preferences' in the section 'standby'.

Connecting the DVD recorder 13