Philips DVDR80 Connecting G transmitter, AMy external receiver is connected only via aerial cable

9Select the input socket of the DVD recorder to which the receiver is connected.

aMy external receiver is connected only via aerial cable

1Press O to move to the next page. Confirm 'Antenna (RF lead)' using OK .

2Enter the channel number under which the external receiver is stored in the DVD recorder. (e.g.: channel number 'P 04'). Use the number

buttons 0..9 , or P- B , P+ A ,	D , C .
If the external receiver is not allocated to a channel number, you must
search and store it in the DVD recorder as if it were a new TV channel.
Read section 'Search TV channels manually'. Please make sure that the
receiver remains switched on during search and, if necessary, switch it on
to a 'test signal'.	Problem

0 Confirm with OK .

ENGLISH

Connecting G transmitter

The external receiver (satellite receiver, set-top box, cable TV box) is controlled via the DVD recorder with the G-LINK cable (supplied). This means you can record TV shows that are received only through the external receiver.

Connection of the G-LINK cable enables the GUIDE Plus+® system to show the correct guide listing.

1Connect the G-LINK cable to the G-LINKsocket at the back of the DVD recorder.

2Position the G-LINK transmitter in front of the external receiver so that the control signal (IR signal) can be transmitted and received by the receiver unhindered.

How do I find the right position?

If the position of the remote (IR) receiver is indicated on your external receiver (IR, remote sensor, or such like), place the transmitter about 1 cm in front of it.

If the position is not indicated, proceed as follows:

1Switch off the external receiver.

2Point the remote control at the front of the external receiver.

3Move the remote control slowly along the front while repeatedly pressing the on/off button.

4When the external receiver switches on or off, you've found the receiver.

5 Attach the G-LINK transmitter about one (1) cm in front of it. Tip

3Switch the receiver on and select programme number 02 on the receiver or using its remote control.

The GUIDE Plus+® System 41