Installation

Autoinstall

Searching for TV channels

00 Channels found

Please wait

Automatic TV channel search (Autoinstall)

During installation, all available TV channels are searched for and stored. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving house, you can start this procedure again. This will replace the stored TV channels with the new ones.

My TV set has Easylink

 

With Easylink, you can search for and store TV channels only on the TV set.

 

These settings are accepted by the DVD recorder. Use this function to start

Tip

the transfer of TV channels from the TV set.

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Switch on the DVD recorder using STANDBY-ONm .

3Press the SYSTEM-MENUbutton on the remote control. The menu bar appears.

4Select 'A' symbol with D or C .

5Select 'Installation' using P- B or P+ A and confirm with C .

6Select 'Autoinstall' using P- B or P+ A .

7Press C .

8'Autoinstall' starts. Wait until all the TV channels have been found. This can take several minutes.

9When Autoinstall has finished, 'Autoinstall complete' will appear on the TV screen.

0The date and time have been set and stored.

ATo end, press SYSTEM-MENU .

You can read about how to search for a TV channel manually in 'Manual TV channel search'.

32

Installing your DVD recorder

 

Page 42
Image 42
Philips DVDR80 manual Automatic TV channel search Autoinstall