Philips DVDR80 manual Connecting with a scart cable without Easy Link

Connecting with a scart cable without 'Easy Link'

Have the following cables ready:

an aerial cable (1, supplied), a mains cable (2, supplied), a scart cable (3).

1Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder.

2Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.

3Plug a scart cable into the scart socket EXT 1 TO TV-I/Oat the back of the DVD recorder and the scart socket for the DVD recorder at the back of the TV set (see TV set operating instructions).

My TV set has several scart sockets. Which one should I use?
Select the scart socket that is suitable for both video output and for video
input.
My TV set shows me a selection menu for the scart socket	?
Select 'VCR' as the source for this scart socket.

4Read the next chapter 'Connecting additional devices' on how to connect additional devices (satellite receivers, videorecorders,...) to the input-/output sockets.

5Switch on the TV set.

6Insert one end of the supplied mains cable into the mains socket 4MAINS at the back of the DVD recorder and the other end into

the wall socket.

The most important features of the DVD recorder will appear in scrolling text on the display. After the first installation is completed this function will be switched off. How you switch on this function again, read in the chapter 'User preferences' in the section 'standby'.

7Switch on the DVD recorder using STANDBY-ONm . '￿￿ ￿￿ ￿￿￿' will appear on the display.

ENGLISH

Connecting the DVD recorder 15