Yamaha RX-V730 owner manual Connecting to digital jacks, o o o

•Connecting to digital jacks

Do not connect this unit or other components to the

mains power until all connections between the

components have been completed.

Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, "+" to "+" and "-" to

"-". Some components require different connection methods and have different jack names. Refer to the

operation instructions for each component to be connected to this unit.

°When you connect other YAMAHA audio components (such as a tape deck, MD recorder and CD player or changer), connect them to the jack with the same

number labels as [_, [_, [] etc. YAMAHA applies this labeling system to all its products.

°After you have completed all connections, check them again to make sure they are correct.

°The name of jack corresponds to input selector.

This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital

and DTS bitstreams. To enjoy multi-channel sound track of DVD software, etc. with DSP effect, you need to make

digital connection. All digital input jacks are acceptable for 96-kHz sampling digital signals.

•The OPTICAL jacks on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this

standard, this unit may not function properly.

DIGITAL INPUT jacks	Antenna input terminals	Speaker terminals
(pages 13-16)	(page 17)	(pages 10-11)
Audio component jacks	Video component	jacks
(page 16)	(pages 14-15)

S_EAKE_S

©

o o o

6CH INPUT jacks	SUBWOOFER OUTPUT	AC OUTLETS
(page 18)	jack (page 11)	(page 19)
DIGITAL OUTPUT jack		OUTPUT jacks
(page 16)		(page 18)

13