Sony 3-270-909-11(1) To set the video output resolution, To output the 1080/24p video signals, jack, Note, Notes, Settings, HDMI OUT, Connecting, VIDEO/S VIDEO

To set the video output resolution

Press VIDEO FORMAT repeatedly to select the desired resolution. Note that the resolution differs depending on the display device, connecting jack and the source material as below.

Settings

Auto

Connecting	HDMI OUT	COMPONENT VIDEO OUT	VIDEO/S VIDEO
jack
	Automatically selects the	480i	480i
	recommended resolution acceptable
	for your TV.

480i	480i	480i	480i
480p	480p	480p	480i
720p	720p	BD:720p, DVD:480p*3	480i
1080i	1080i	BD:1080i, DVD:480p*3	480i
1080p	1080p	480p	480i
Source Direct	Output differs depending on source	Output differs depending on source	480i
	material*1	material*2

*1 Outputs in the same resolution and frequency as recorded on the disc.

*2 1080/24p video signals are not output from the COMPONENT VIDEO OUT jacks.

*3 Outputs in the resolution of the original setting (720p or 1080i) when the DVD is not copy guarded.

Notes

•If the picture is not clear, natural or to your satisfaction, try another resolution that suits the disc and your TV/projector, etc. For the details, refer also to the instruction manual supplied with the TV/projector, etc.

•480i or 480p video signals may be output when you connect to the COMPONENT VIDEO OUT jacks and play some copy-guarded BDs/DVDs. To enjoy the HD quality resolution in this case, connect the display device to the HDMI OUT jack using an HDMI cord.

•Even when you select a setting other than “Auto,” the player automatically adjusts the video signals if the TV cannot accept the set resolution.

To output the 1080/24p video signalsA 1080/24p-compatible TV is required for this setting.

1

2

Set “24p Output” in “Video Setup” to “On” (page 45).Press VIDEO FORMAT repeatedly to select “Auto” or “Source Direct.”

Note

If there is no picture, press VIDEO FORMAT repeatedly until the picture appears correctly.

46