ePress Z to close the disc tray.Wait a short while until the disc type appears on the front panel display.fPress H to start playback.For more information about the remote’s operations, see page 24.

Buttons Details

XPauses playback, or restarts playback from the same point.

xStops playback, or cancels the resume point when pressed twice.

HStarts or restarts playback from the previous stop point.

gWhen you finish playing, press Z to open the disc tray.hRemove the disc, and press Z again to close the disc tray.iPress \/1 to turn off the player.To use the BD’s or DVD’s menu

When you play a BD-ROM, DVD VIDEO, or a finalized DVD+RW, DVD-RW (Video mode), DVD+R, or DVD-R (Video mode), you can display the disc’s menu by pressing TOP MENU or POP UP/MENU. Some BDs/DVDs display the menu automatically. Either cases, navigate through the menu using </M/m/,, ENTER, or the number buttons and the color buttons as indicated by the disc’s on-screen instructions. The BD menu is operable without interrupting playback.

To play restricted BDs

Change the “BD Parental Control” setting (page 30).

To play restricted DVDs

For a restricted DVD, the display asks for the password. For “DVD Parental Control” setting, see page 30.

1 Enter your four-digit password using the number buttons.2 Press ENTER to confirm.To register or change the password, see page 29.Notes about Resume Play

•Playback starts from the beginning if the title has not been played or the previous stop point is canceled.

•The stop point is canceled when:

–you change the settings on the player.

–you turn off the player (BD-ROM and DATA DVD only).

–you press x twice.

–you open the disc tray.

–you use a search function.

•The player remembers the stop point for one title/track/file only. On a music CD, playback resumes from the beginning of the track.

•Depending on the disc, the Resume function may not work.

About the screen saver function

To prevent damage to your display device (ghosting), a screen saver image appears when the player is left unattended, has no disc inserted, or no title/slideshow is displayed for 15 minutes. To cancel, press any button on the remote or the player.

About One-Touch Play (for ‘BRAVIA’ Theatre Sync only)

With one touch of the H button, the player and your TV/AV receiver automatically turn on and the TV/AV receiver’s input is switched to the player. Playback starts automatically. To use this function, set “HDMI Control” of “Options” setup to “On” (page 52).

The TV/AV receiver’s input will also switch to the player automatically, in the following cases:

–You press H, SYSTEM MENU, TOP MENU, or POP UP/ MENU buttons on the remote.

–A disc with auto playback function is loaded.

Operations Basic

21