Choosing and Installing Attachments–Cutting Blades
wWARNING
Pinch and Cut Hazard
Make sure that the mixer is off and unplugged before installing or removing attachments and parts.
Blades are sharp! Use extreme care when handling.
Failure to follow these instructions can result in broken bones, cuts, or other serious injury.
Always keep the appliance unplugged during assembly and disassembly.
When to use the blades:
The cutting blades are used for most chopping, shredding, and mixing operations.
To install the cutting blades:
1.Fit the attachment into the end of the motor housing, aligning the three tabs on the blade assembly with the notches in the motor housing.
2.While holding the motor housing in one hand, turn the shaft base clockwise until it locks into place.
The cutting blades can be removed from the stainless steel shaft for cleaning or replacement. The cutter head shaft has
1. Use a 7/32″ wrench | 7/32″ |
|
or a pair of needle |
| |
Wrench |
| |
nose pliers to hold |
| |
|
| |
the flat portion of the |
|
|
shaft between the |
|
|
cutter head and the |
|
|
guard. |
| 7/16″ |
2. While holding the |
| |
| Wrench | |
shaft in place, use a |
| |
|
| |
7/16″ wrench to turn |
|
|
the blades clockwise to loosen the blades. |
| |
3.When reinstalling the blades, thread the cutter head into the shaft counterclockwise, and make sure it is tightened securely in place.
4
