When connecting to your TV via a VCR

Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).

When your TV is monaural (When your TV has only one audio input jack)

Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.

If your TV/VCR has a 21-pin adaptor(EUROCONNECTOR)

Use the 21-pin adaptor supplied with your camcorder (For models with the mark printed on their bottom surfaces only). This adaptor is designed for output use only.

bNotes

When the A/V connecting cable is used to output images, images are output with SD (standard definition) image quality.

zTips

If you connect your camcorder to the TV using more than one type of cable to output images, the order of priority of the TV input jacks is as follows:

HDMI t component t S VIDEO t video.

HDMI (High Definition Multimedia Interface) is an interface to send both video/audio signals. The HDMI OUT jack outputs high quality images and digital audio.

On “PhotoTV HD”

 

Your camcorder is compatible with

 

“PhotoTV HD.” “PhotoTV HD” allows for

 

highly-detailed, photo-like depiction of

 

subtle textures and colors. By connecting

 

Sony’s PhotoTV HD-compatible devices

 

using an HDMI cable* or a component A/V

 

cable**, a whole new world of photos can

 

be enjoyed in breathtaking full HD quality.

 

* The TV will automatically switch to the

 

appropriate mode when displaying photos.

 

** Setup of the TV will be necessary. Please refer

 

to the instruction manual of your PhotoTV

Recording/Playback

HD-compatible TV for details.

 

Using “BRAVIA” Sync

You can do the playback operation with the remote commander of your TV by connecting your camcorder to a “BRAVIA” Sync compatible TV launched in 2008 or later with the HDMI cable.

HDMI cable

1 Connect your camcorder and a “BRAVIA” Sync compatible TV* with the HDMI cable (optional).

45